TVI Electronics

15" SAW Touch Kit [TK-150-SW-CT ]

Thu, 01 May 2008 08:13:57 -0500

Technology Overview

The Surface Acoustic Wave (SAW) technology is one of the most advanced touch screen types. The technology is based on two transducers (transmitting and receiving) placed for the both of X and Y axis on the touch panel. The other important element of SAW is placed on the glass, called reflector. The controller sends electrical signal to the transmitting transducer, and transducer converts the signal into ultrasonic waves and emits to reflectors that are lined up along the edge of the panel. After reflectors refract waves to the receiving transducers, the receiving transducer converts the waves into an electrical signal and sends back to the controller. When a finger touches the screen, the waves are absorbed, causing a touch event to be detected at that point.

Because the panel is all glass, there are no layers that can be worn, giving this technology the highest durability factor and also the highest clarity. Compared to resistive and capacitive technologies, it provides superior image clarity, resolution, and higher light transmission.
This technology is recommended for ATMs, Amusement Parks, Banking and Financial Applications, public information kiosks, computer based training, or other high traffic indoor environments.

Surface Acoustic Wave (SAW) Technology Benefits:

High touch resolution

Highest image clarity

High light transmission

High impact resistance

All glass panel, no coatings or overlays to wear out, scratch, or tear

Tempered, heat or chemically strengthened glass

Safe break pattern (tempered only)

Sizes from 8.4 inches to 24 inches

Thicknesses of 0.118 inch (3.0 mm) and 0.50 inch (12.0 mm)

Disadvantages of Surface Acoustic Wave (SAW) technology:

Must be touched by finger, gloved hand, or soft-tip stylus. Something hard like a pen won't work.

Not completely sealable, can be affected by large amounts of dirt, dust, and / or water in the environment.

Description

15" Surface Acoustic Wave Touch Panel & TouchScreen USB Controller is a great solution for a new project or just a replacement. The touch screen is placed over the LCD so that the responsive area of the panel covers the viewable area of the display. It is pressure sensitive so it responds to any input device, including finger, gloved hand, or soft-tip stylus. The TouchScreen controller provides the outstanding touch performance and ease of use for various touch applications. Its compact design makes easy integration into flat panel displays and mobile devices, using USB or RS232 data communication.

Touch Screen Specifications

Technology: Surface Acoustic Wave (SAW)
Overall Outline Dimensions (WxHxD mm): 348.0 (13.70 in) ± 1.3 (0.05 in) x 276.9 (10.90 in) ± 1.3 (0.05 in) x 3.0 (0.118 in)
Viewing Area (WxH mm): 314.3 (12.37 in) ± 0.8 (0.03 in) x 239.3 (9.42 in) ± 0.8 (0.03 in)
Active Area (HxH mm): 306.1 (12.05 in) x 230.2 (9.06 in)
Glass Thickness: 3.0 mm (0.118 in)
Resolution: 4096 x 4096 touch points per square inch
Optical Specifications:
- Film type: Anti-glare, Anti-reflective
- Glass, no coatings or overlays to wear out, scratch, or tear
- Tempered, heat or chemically strengthened glass
- Safe break pattern (tempered only)
- Light Transmission: 90% - 92% (According to ASTM D1003)
Electrical Specifications:
- Accuracy: Extremely Consistent, Very Stable, No-Drift, one-time calibration is enough
- Deviation of Error: ± 2 mm
- Conversion Time: Approximately 15 ms per coordinate report
Mechanical Specifications:
- Input Method: finger, gloved hand, or soft-tip stylus
- Touch Activation Force: Typically 3 to 4 ounces (lower than 100 grams)
- Z-axis: 256 levels of pressure
- Construction: Glass panel with transducers attached to the front surface of the glass
Reliability:
- Operation Environment: -20° C ~ +50° C
- Storage Temperature: -40° C ~ +70° C
- Humidity: 10% - 90%
- Touch Durability: More than 50,000,000 touches in a single location without any failure, using a stylus similar to a finger
- Surface Durability: Mohs hardness rating of 7, scratch-resistance even by knifes or sharp metal pieces
- Reliability: MTBF: greater than 450,000 hours per MIL-HDBK-217-F2 using the parts stress calculation method for ground benign environment with an ambient temperature of 35° C

Controller Features

Physical Characteristics

Construction:
- Multi-layer surface-mount design with internal ground plane for EMI suppression
Dimensions:
- Total Width: 2.48 inches (63 mm), including connectors
- Total Length: 3.346 inches (85 mm)
- Total height: 0.425 inches (10.8 mm)
- All mounting holes are plated through for chassis ground connection.

Electrical Parameters

Supply Voltage and Current:
- +12 VDC, nominal（+11 VDC to +13 VDC）
- 85 mA, typical at +12 VDC. Average power dissipation is 1 W, typical.
- Supply must be capable of sourcing 200 mA, minimum.
- Total noise and ripple requirement must be less than 100 mV (p-p) for frequency below 1 MHz, and less than 50 mV (p-p) for frequencies above 1 MHz.
Interface:
- USB 1.1
Reliability:
- MTBF greater than 200,000 hours per MIL-HDBK-217-F2 using the parts stress calculation method for ground benign environment with an ambient temperature of 40°C.
ESD:
- Per EN 6100-4-2: Contact discharge 4kV, air discharge 8kV.
Touch Resolution:
- 4096x4096, size independent, 256 levels of Z axis (pressure)
Conversion Time:
- Less than 15 ms per coordinate set (including transmitting time)
Humidity:
- Operating: 10% to 90% RH, non-condensing
- Storage: 10% to 90% RH, non-condensing
Flammability:
- The printed circuit board substrate is rated 94V0. All plastic components, such as headers and connectors, are also rated 94V0.
Environmental Temperature:
- Operating: -20°C to 50°C
- Storage: -40°C to 70°C

Regulatory Approvals: FCC, CE

Supporting Operation Systems: Windows 98/ME/2000/XP

Accessories

Name	Specs.	Characteristics	Application	Operation and Notice
SAW TouchScreen Controller Model: CA-30U	View	Multi-layer surface-mount design with internal ground plane for EMI suppression	It powers up the touch screen, controls the excitation, and interprets the information received from the touch screen.	Properly connect the controller according to the installation guide.
SAW Connecting Cables	View	Stable and reliable with perfect electromagnetic compatibility	It is mainly used to perform the data communication between PC and controller and to supply power to the controller.	Properly connect the interfaces according to the installation guide.

Support Documentation

ConTouch SAW TouchScreen Specifications (pdf - 268 KB)

15-inch SAW TouchScreen Drawing (.pdf - 36.0 KB)

Hardware Installation Guide (pdf - 497 KB)

USB Tool & HID (Human Interface Device) Driver:

Windows® 98/ME/2000/XP (Release 1.0.0 - 6/28/2004 - 119 KB)

LCD Monitor AC Adapter [LCA01F ]

Sat, 08 Mar 2008 20:40:57 -0500

Overview

This Lien Chang 12VDC 3.3A Desktop Transformer is ideal for use with your Flat Panel Monitor or LCD Display. The High Performance AC Power Adapter delivers consistent and continuous power at the specified Voltage and up to the Maximum specified Amperage. These AC Adapters are manufactured to the highest standards and use state-of-the art technology to ensure years of trouble free performance. This AC Adapter meets or exceeds OEM specifications and is fully compatible with the Flat Panel Monitor or LCD Display part number and devices specified here. Does your Flat Panel Monitor or LCD Display AC Adapter run hot or produce static or interference with your other digital devices? Upgrade to a modern, low profile, high efficiency, low temperature, low noise Flat Panel Monitor or LCD Display AC Adapter today.

Features

Premium Quality Flat Panel Monitor AC Power Adapter
Extreme Reliability and Durability
High Energy Efficiency
Compact, Lightweight Design
Meets or Exceeds Flat Panel Monitor and LCD Display Original Equipment Manufacturers Specifications for AC Power Adapters
CE approved and meets all FCC Requirements
Manufactured to ISO-9002 and other Quality Standards
Fully tested against Temperature, Radio Interference, Shock and Vibration, Dynamic Load
Connector Views:

Specifications

40 Watt, 12 Volt DC Adapter, 3.3 Amps
5.5 mm Barrel Connector with Positive inside
100% OEM compatible, Guaranteed to meet or exceed OEM specifications
Includes Power Cord with Wall Outlet Plug

Compatible Models

Megavision MV140
Megavision MV151
Megavision MV170
Megavision MV171
Megavision MV173
Microtek 710S
Microtek C593
Microtek C783GM
Microtek C997SD
Neso LD500
eso LD500V
Neso LD530
Neso LD700V
Neso LD730
Neso PIXOAT700S

5.7" 4-Wire Resistive Touch Screen [TSR-057-4W-HLD ]

Tue, 08 Jan 2008 08:29:02 -0500

Technology Overview

Offering excellent durability and resolution, resistive technology is used in a variety of applications and environments. Resistive touchscreens consist of a glass panel with a coating of uniform resistivity, plus a polyester cover sheet which is tightly suspended from the top of the glass and separated from it by small, transparent insulating dots. The cover sheet has a hard, durable coating on the outer side, and a conductive coating on the inner side. When touched, the conductive coating makes electrical contact with the coating on the glass, and a touch is registered by the analog controller.

Benefits of Touchscreen technology:

Touchscreens enable first-time users to interface with computers instantly, without any operator training whatsoever

Touchscreens virtually eliminate operator errors because users make selections from clearly defined menus

Touchscreens eliminate keyboards and mice, which many novice users find intimidating and cumbersome to use

Touchscreens are rugged enough to stand up to harsh environments where keyboards and mice can become damaged

Touchscreens provide fast access to all types of digital content

Touchscreens ensure that no space is wasted because the input device is completely integrated into the monitor.

Features:

Proven Resistive Technology

Simplicity of Interface Electronics

Durable Plastic Construction

Less Susceptible to Accidental Touch

Ability to use Finger or Stylus to Activate Touchscreen

High Linear Analog Output

Resistive touchscreens deliver cost-effective, consistent and durable performance in environments where equipment must stand up to contaminants and liquids, such as in restaurants, factories, and hospitals. Disadvantages of resistive touchscreens include only 75% optical transparency and the fact that a sharp object can damage the resistive layers.

Description

4-Wire Resistive Touch Panel for 5.7" LCD monitors. Touch Innovations Touch Screens are perfect for PDAs, web phones, and other handheld consumer applications. The superior film on glass construction offers the very best light transmission reliability and durability.

Specs

Touch Screen: 4-Wire Analog Resistive
Controllers Available: 4-Wire Resistive SLT-TP05-USB or SLT-TP05-RS232 (sold separately)
Overall Outline Dimensions (WxHxD mm): 137.4 ± 0.2 x 109.0 ± 0.2 x 1.4 ± 0.1
Viewing Area (WxH mm): 123.0 x 93.4
Active Area (WxH mm): 118.5 x 90.0
Spacer (mm): 0.1
Dot Pitch (WxH mm): 3.0 x 3.0
Glass: ITO Glass, 1.1 mm
PET (ITO Film) Front Surface: Clear Hard-coating, Anti-glare, Anti-Newton ring ITO Film, 188 um
Connector: FPC, 4Pin
Optical Specifications:
- Film type: Anti-glare, Anti-reflective
- EM/RFI Shielding
- Contrast Enhancement Filter (CEF) and/or Circular Polarizer
- Glass, Acrylic or Polycarbonate Backer
- Light Transmission: 80 ± 3% at 550nm wave length
Electrical Specifications:
- Operation Voltage: 5V DC, 1mA
- Insulation Impedance: 10MΩ or more @ 25V(DC)
- Linearity: 98.5% (bias less than 1.5%)
- Chattering Time: 30 msec or less
Mechanical Specifications:
- Input Method: finger, pen or gloved hand
- Touch Activation Force: 40 grams or less with Æ2mm Manuscript pen
- Surface Hardness: 3H (Pencil Test) & Hard Coated ITO PET
Reliability:
- Operation Environment: -10° C ~ 60° C
- Storage Temperature: -20° C ~ 70° C
- Humidity: 60° C, 90% RH 120 HR
- Touch Durability: 5 Million touches in a single location
- Surface scratch: 500K (250g, 60mm/s)
- Surface pitting: 10M (250g at 2 times/s)
- NEMA 4 Capable
- Warranty: 1 year

Features

Superior Accuracy / Drift-free operation - 98.5% Linearity

Supported Operating Systems: MS-DOS, Windows 95/98/2000/CE/ME/2000NT, OS/2, MAC, Linux, etc.

Light Transmission: 80 ± 5% at 550nm wave length

Input Mode: Finger, gloved hand and stylus input

Drawings

5.7-inch Touch Panel Drawing (pdf - 117 KB)

17" SAW Touch Kit [TK-170-SW-KT ]

Tue, 06 May 2008 08:13:57 -0500

High touch resolution

Highest image clarity

High light transmission

High impact resistance

All glass panel, no coatings or overlays to wear out, scratch, or tear

Safe break pattern (tempered glass)

Provides excellent impact-proof, vandal-proof performance and could be used in public environments where vandalism is a concern or in unsupervised or industrial environments.

Even if a touchscreen is broken, the fragments are safe with no sharp edges.

With tempered, 6mm thickness glass, these touchscreens can withstand the impact of a 1000g steel ball dropped from a height of 1 meter, in accordance with Trial Standard Number GB/T9963-1998.

With a tempered, 4mm-thickness-glass, these touchscreens can withstand the impact of a 500g steel ball dropped from a height of 1.3 meters, in accordance with Trial Standard Number 60950©IEC 1999.

Anti-glare SAW touch screens (G series) are available: typically designed for outdoor application or strong-light environments greatly, reduce the light reflected to the eyes from the surface of the touchscreen to protect your eyes and increase the clarity of the display./li>

Dust-proof and water-proof SAW touch screens (W series) are available: can protect the reflective grating and the transducers from the water and the dust.

Sizes from 8.4 inch ~ 47 inch

Thicknesses of 0.157 inch (4.0 mm), 0.236 inch (6.0 mm) or 0.50 inch (12.0 mm)

Disadvantages of Surface Acoustic Wave (SAW) technology:

Must be touched by finger, gloved hand, or rubber soft-tip stylus. Something hard like a pen won't work.

Not completely sealable, can be affected by large amounts of dirt, dust, and / or water in the environment.

Description

17" Surface Acoustic Wave Touch Panel & TouchScreen USB Controller is a great solution for a new project or just a replacement. The touch screen is placed over the LCD so that the responsive area of the panel covers the viewable area of the display. It is pressure sensitive so it responds to any input device, including finger, gloved hand, or soft-tip stylus. The TouchScreen controller provides the outstanding touch performance and ease of use for various touch applications. Its compact design makes easy integration into flat panel displays and mobile devices, using USB or RS232 data communication.

We can provide the customization for the touch panel size according to the customers' needs.

Touch Screen Specifications

Technology: Surface Acoustic Wave (SAW)
Overall Outline Dimensions (WxHxD mm): 382.0 (15.04 in) x 312.0 (12.28 in) x 4.0 (0.157 in)
Viewing Area (WxH mm): 346.1 (13.63 in) ± 0.8 (0.03 in) x 278.1 (10.95 in) ± 0.8 (0.03 in)
Active Area (HxH mm): 340.0 (13.39 in) x 272.0 (10.71 in)
Glass Thickness: 4.0 mm (0.157 in)
Resolution: 4096 x 4096, Z axis 256, irrelevant with the size of the touch panel
Optical Specifications:
- Material: Pure glass (tempered); no coatings or overlays to wear out, scratch, or tear
- Safe break pattern (tempered only)
- Light Transmission: 90% - 92%
Electrical Specifications:
- Accuracy: Extremely Consistent, Very Stable, No-Drift, one-time calibration is enough
- Deviation of Error: < 2 mm (0.080 inch)
Mechanical Specifications:
- Input Method: finger, gloved hand, rubber soft pen, etc.
- Touch Activation Force: Typically 3 to 4 ounces (lower than 100 grams)
- Z-axis: 256 levels of pressure
- Construction: Glass panel with transducers attached to the front surface of the glass
Reliability:
- Operation Environment: -20° C ~ +60° C
- Storage Temperature: -40° C ~ +70° C
- Humidity: 10% - 90% 40° C
- Operating Altitude: 3800m
- Durability: Scratch-free; more than 50,000,000 touches in one location without any failure.
- Surface Hardness: Mohs' hardness rating of 7
Anti-Chemical Properties:
- The active area can resistant to all chemicals what do not affect glass, such as: acetone, toluene, methyl ethyl ketone, isopropyl alcohol, methyl alcohol, ethyl acetate, ammonia-based glass cleaners, gasoline, kerosene, vinegar.
Agency Approval: UL, CE, FCC, RoHS, CB

Controller Features

Physical Characteristics

Construction:
- Multi-layer surface-mount design with internal ground plane for EMI suppression
Dimensions (PCB):
- Total Width: 2.17 inches (55 mm)
- Total Length: 3.346 inches (85 mm)
- Total height: 0.394 inches (10 mm)
- All mounting holes are plated through for chassis ground connection.

Electrical Parameters

Working Voltage and Current:
- 5VDC ± 0.5V
- USB: 70mA (max. 80mA), RS232: 120mA (max. 130mA)
Interface:
- Have the dual USB and RS232 interface
Reliability:
- MTBF: 25000 hours
Resolution:
- 4096x4096, Z axis 256, irrelevant with the size of the touch
Response Time:
- Less than 10 ms
Operating Humidity:
- 10%-90% RH
Environmental Temperature:
- Operating: -20°C to 70°C
- Storage: -40°C to 85°C

Multi-Point Touch: Intelligent discrimination by software

Touch Activation Force: 40g

Drivers Available: Windows 98/2000/XP/XP Embedded/Vista

Accessory: USB or RS232 cable

Agency Approval: UL, CE, FCC, RoHS, CB

Accessories

Name	Specs.	Characteristics	Application	Operation and Notice
SAW TouchScreen Controller P/N: KCA-U001L-R3B	View	Multi-layer surface-mount design with internal ground plane for EMI suppression	It powers up the touch screen, controls the excitation, and interprets the information received from the touch screen.	Properly connect the controller with the touch screen and the PC.
USB Cable	View	Stable and reliable with perfect electromagnetic compatibility	It is mainly used to perform the data communication between PC and controller and to supply power to the controller from PC USB jack.	Properly connect the USB cable to the controller and PC USB jack.

Support Documentation

KT SAW TouchScreen Catalog (pdf - 8.84 MB)

17-inch SAW TouchScreen Drawing (pdf - 142 KB)

Product Installation Guide (pdf - 384 KB)

Callibration Utility Program:

Windows® 98/2000/XP/XP Embedded/Vista (Release 1.0.0.1 - 9/16/2007 - 107 KB)

4.7" 4-Wire Resistive Touch Screen [TSR-047-4W ]

Thu, 20 Dec 2007 21:01:57 -0500

Touchscreens enable first-time users to interface with computers instantly, without any operator training whatsoever

Touchscreens virtually eliminate operator errors because users make selections from clearly defined menus

Touchscreens eliminate keyboards and mice, which many novice users find intimidating and cumbersome to use

Touchscreens are rugged enough to stand up to harsh environments where keyboards and mice can become damaged

Touchscreens provide fast access to all types of digital content

Touchscreens ensure that no space is wasted because the input device is completely integrated into the monitor.

Features:

Proven Resistive Technology

Simplicity of Interface Electronics

Durable Plastic Construction

Less Susceptible to Accidental Touch

Ability to use Finger or Stylus to Activate Touchscreen

High Linear Analog Output

Resistive touchscreens deliver cost-effective, consistent and durable performance in environments where equipment must stand up to contaminants and liquids, such as in restaurants, factories, and hospitals. Disadvantages of resistive touchscreens include only 75% optical transparency and the fact that a sharp object can damage the resistive layers.

Description

4-Wire Resistive Touch Panel for 4.7" LCD monitors. Perfectly fits the Optrex F-51854GNFJ-SLW-ABN LCD case. The superior film on glass construction offers the very best light transmission reliability and durability.

Specs

Touch Screen: 4-Wire Analog Resistive
Controllers Available: 4-Wire Resistive SLT-TP05-USB or SLT-TP05-RS232 (sold separately)
Overall Outline Dimensions (WxHxD mm): 112.0 ± 0.3 x 90.0 ± 0.3 x 1.4 ± 0.2
Viewing Area (WxH mm): 104.0 x 81.0
Active Area (WxH mm): 100.0 x 77.0
Spacer (mm): 0.1
Dot Pitch (WxH mm): 3.0 x 3.0
Glass: ITO Glass, 1.1 mm
PET (ITO Film) Front Surface: Clear Hard-coating, Anti-glare, Anti-Newton ring ITO Film, 188 um
Connector: FPC, 4Pin
Optical Specifications:
- Film type: Anti-glare, Anti-reflective
- EM/RFI Shielding
- Contrast Enhancement Filter (CEF) and/or Circular Polarizer
- Glass, Acrylic or Polycarbonate Backer
- Light Transmission: 83 ± 5% at 550nm wave length
Electrical Specifications:
- Operation Voltage: 5V DC, 1mA
- Insulation Impedance: 10MΩ or more @ 25V(DC)
- Linearity: 98.5% (bias less than 1.5%)
- Chattering Time: 30 msec or less
Mechanical Specifications:
- Input Method: finger, pen or gloved hand
- Touch Activation Force: 40 grams or less with Æ2mm Manuscript pen
- Surface Hardness: 3H (Pencil Test) & Hard Coated ITO PET
Reliability:
- Operation Environment: -20° C ~ 70° C
- Storage Temperature: -30° C ~ 80° C
- Humidity: 60° C, 90% RH 120 HR
- Touch Durability: 5 Million touches in a single location
- Surface scratch: 500K (250g, 60mm/s)
- Surface pitting: 10M (250g at 2 times/s)
- NEMA 4 Capable
- Warranty: 1 year

Drawings

4.7-inch Touch Panel Drawing (pdf - 234 KB)

Recommended Connectors

Part No.		Pitch	Description	Drawing (PDF)
	Molex Part # 052089-0419	1.00 mm (0.039 in)	FFC/FPC Connector, Through-Hole, Right Angle, Low Profile, ZIF, Top Contact Style Receptacle, 4 Circuits, Lead-free	View
	Molex Part # 052043-0419	1.00 mm (0.039 in)	FFC/FPC Connector, Through-Hole, Right Angle, ZIF, Bottom Contact Style Receptacle, 4 Circuits, Lead-free	View
	Molex Part # 052207-0485	1.00 mm (0.039 in)	FFC/FPC Connector, SMT, Right Angle, ZIF, Top Contact Style Receptacle, 4 Circuits, Lead-free	View

Touch Screen LCD Module [TM4B3WB ]

Tue, 20 Nov 2007 18:34:27 -0500

Touch Screen LCD Module includes:

Controller Version: TC51320
External EEPROM: 512kb
LCD Model: Optrex F-51320GNF-AC 128x64 2.8"
LCD Mode: White/Black No Backlight
Touch screen: 2.8" 4-Wire Analog Resistive
CD-ROM with supporting documentation (one per order).

7.0" 4-Wire Resistive Touch Screen [TSR-070-4W-HLD ]

Fri, 09 Nov 2007 14:14:17 -0500

Touchscreens enable first-time users to interface with computers instantly, without any operator training whatsoever

Touchscreens virtually eliminate operator errors because users make selections from clearly defined menus

Touchscreens eliminate keyboards and mice, which many novice users find intimidating and cumbersome to use

Touchscreens are rugged enough to stand up to harsh environments where keyboards and mice can become damaged

Touchscreens provide fast access to all types of digital content

Touchscreens ensure that no space is wasted because the input device is completely integrated into the monitor.

Features:

Proven Resistive Technology

Simplicity of Interface Electronics

Durable Plastic Construction

Less Susceptible to Accidental Touch

Ability to use Finger or Stylus to Activate Touchscreen

High Linear Analog Output

Resistive touchscreens deliver cost-effective, consistent and durable performance in environments where equipment must stand up to contaminants and liquids, such as in restaurants, factories, and hospitals. Disadvantages of resistive touchscreens include only 75% optical transparency and the fact that a sharp object can damage the resistive layers.

Description

4-Wire Resistive Touch Panel for 7.0" LCD monitors. Touch Innovations Touch Screens are perfect for PDAs, web phones, and other handheld consumer applications. The superior film on glass construction offers the very best light transmission reliability and durability.

Specs

Touch Screen: 4-Wire Analog Resistive
Controllers Available: 4-Wire Resistive SLT-TP05-USB or SLT-TP05-RS232 (sold separately)
Overall Outline Dimensions (WxHxD mm): 169.8 ± 0.3 x 105.8 ± 0.3 x 1.4 ± 0.1
Viewing Area (WxH mm): 155.60 x 93.60
Active Area (WxH mm): 152.00 x 90.00
Spacer (mm): 0.1
Dot Pitch (WxH mm): 3.0 x 3.0
Glass: ITO Glass, 1.1 ± 0.1 mm
PET (ITO Film) Front Surface: Clear Hard-coating, Anti-glare, Anti-Newton ring ITO Film, 188 um
Connector: FPC, 4Pin
Optical Specifications:
- Film type: Anti-glare, Anti-reflective
- EM/RFI Shielding
- Contrast Enhancement Filter (CEF) and/or Circular Polarizer
- Glass, Acrylic or Polycarbonate Backer
- Light Transmission: 78 ± 5% at 550nm wave length
Electrical Specifications:
- Operation Voltage: 5V DC, 1mA
- Insulation Impedance: 10MΩ or more @ 25V(DC)
- Linearity: 98.5% (bias less than 1.5%)
- Chattering Time: 30 msec or less
Mechanical Specifications:
- Input Method: finger, pen or gloved hand
- Touch Activation Force: 60 - 150 grams
- Surface Hardness: 3H (Pencil Test) & Hard Coated ITO PET
Reliability:
- Operation Environment: -20° C ~ 80° C
- Storage Temperature: -40° C ~ 80° C
- Humidity: 60° C, 90% RH 120 HR
- Touch Durability: 1 Million touches in a single location
- Surface scratch: 500K (250g, 60mm/s)
- Surface pitting: 10M (250g at 2 times/s)
- NEMA 4 Capable
- Warranty: 1 year

Features

Superior Accuracy / Drift-free operation - 98.5% Linearity

Supported Operating Systems: MS-DOS, Windows 95/98/2000/CE/ME/2000NT, OS/2, MAC, Linux, etc.

Light Transmission: 78 ± 5% at 550nm wave length

Input Mode: Finger, gloved hand and stylus input

Drawings

7-inch Touch Panel Drawing (pdf - 129 KB)

LCD Kit [TK-10 ]

Wed, 24 Oct 2007 21:03:47 -0500

LCD Kit:
* Touch Screen LCD Module
* AC Adaptor
* Serial Cable

The LCD Kit contains everything you need to rapidly prototype, test and implement LCD into your project! Save money by purchasing all required products in a bundle rather than purchasing them separately. The LCD Kit comprises an evaluation board with a 128 x 64 format display, software, a serial cable, a power supply and support documentation.

Touch Screen LCD Module [TM4B3YG ]

Mon, 22 Oct 2007 10:30:31 -0500

Touch Screen LCD Module includes:

Controller Version: TC51320
External EEPROM: 512kb
LCD Model: Optrex F-51320GNY-LY-AFN 128x64 2.8"
LCD Mode: Blue/White
Touch screen: 2.8" 4-Wire Analog Resistive
CD-ROM with supporting documentation (one per order).

This kit is assembled and ready to use.

Touch Screen LCD Module [TM4B3BW ]

Mon, 22 Oct 2007 10:15:25 -0500

Touch Screen LCD Module includes:

Controller Version: TC51320
External EEPROM: 512kb
LCD Model: Optrex F-51320GNB-LW-AEN 128x64 2.8"
LCD Mode: Blue/White
Touch screen: 2.8" 4-Wire Analog Resistive
CD-ROM with supporting documentation (one per order).

This kit is assembled and ready to use.

TC51320 LCD Controller [TC51320 ]

Mon, 22 Oct 2007 08:14:05 -0500

Description

TC51320 Evaluation/Demo board for Optrex F-51320 LCDs. The TC51320 controller supports Optrex F-51320 Series 128x64 COG Monochrome STN Graphic LCDs. This controller allows user to individually control each display pixel. This independent pixel control allows displaying both text and pictures simultaneously. The TC51320 uses an ATMEGA16 microcontroller and external AT24C512 serial EEPROM. The microcontroller can be reprogrammed at any time by using AVRISP device. This board requires a single 5 VDC supply to be plugged into J5 connector (bypass voltage regulator) or 7-15 VDC power supply to be plugged into J11 connector.

TC51320 includes a CD-ROM with supporting documentation (one per order).

Features

RS-232 communication interface PC and TTL (8051 Family, Basic Stamp, PIC, or TTL Compatible)
Nine programmable baud rates
512k bites external EEPROM
Touch screen controller
AVRISP Interface
Draw/Clear Line/Rectangle/Circle
7-15 VDC voltage regulator (for F-51320GNY-LY-AFN 9 VDC is recommended)
Software controls contrast, backlight ON/OFF, display ON/OFF
8 port pins of ATmega16 microcontroller (PA6, PA7, PC2, PC3, PD4, PD5, PD6, PD7) are available for your personal use
Horizontal Scrolling Bar (25 characters max.)
3 integrated fonts: 5x7, 8x14, 8x14 Bold (custom fonts are available)

17.1" 5-Wire Resistive Touch Screen [TSR-171-5W ]

Wed, 10 Oct 2007 11:46:59 -0500

Technology Overview

Five-wire resistive is the most accurate and reliable touchscreen technology. 5-Wire Resistive touch technology consists of a glass or acrylic panel that is coated with electrically conductive and resistive layers. The thin layers are separated by invisible separator dots. When operating, an electrical current moves through the screen. When pressure is applied to the screen the layers are pressed together, causing a change in the electrical current and a touch event to be registered. 5-Wire Resistive touchscreens typically have a 3H or 4H hardness rating which means that they will resist scratching from items with pencil point hardness.

Advantages:

High touch resolution

Pressure sensitive, works with any stylus

Not affected by dirt, dust, water, or light

Continued operation even with a cut coversheet (as long as the ITO coating on the glass is not damaged)

Could be operated in the environment with -10° C ~ 60° C

More durable and offer a much greater lifetime and stability than 4-Wire Resistive type

Disadvantages:

80% clarity

Resistive layers can be damaged by a sharp object

Glass is obviously fragile and can be easily broken with a small impact

More expensive than 4-Wire Resistive type

Custom design and sizes between 5.7 to 21.3 inch are available upon request.

Description

5-Wire Resistive Touch Panel for 17" LCD monitors. These Touch Screens are designed for extreme and high-use environments and features superior durability, resolution, accuracy and positioning speed. Resistive touchscreens deliver cost-effective, consistent and durable performance in environments where equipment must stand up to contaminants and liquids, such as in restaurants, factories, and hospitals.

Common Applications:

POS terminals

Financial - ATM & Bill Pay Kiosks

Factory Automation

Industrial Control

Medical Equipment

Retail Kiosks

Specs

Touch Screen: 5-Wire Analog Resistive
Controllers Available: 5-Wire Resistive TP05-5W-USB or TP05-5W-RS232 (sold separately)
Overall Outline Dimensions (WxHxD mm): 362.0 ± 0.3 x 278.5 ± 0.3 x 1.8 ± 0.1
Viewing Area (WxH mm): 340.0 x 258.5
Active Area (WxH mm): 324.0 x 240.5
Glass: ITO Glass, 1.8mm
Front Material/Thickness: Transparent PET (3H) 0.188 mm
Rear Material/Thickness: Glass/1.5t mm
Connector: FPC, 5Pin
Optical Specifications:
- Film type: Polished, Anti-glare or Anti-reflective
- Light Transmission: Standard 80% ± 3% at 550nm wave length
Electrical Specifications:
- Operation Voltage: DC 5V
- Insulation Impedance: 10MΩ or more @ 25V (DC)
- Linearity: 98.0% (bias less than 2.0%)
- Chattering Time: 30 msec or less @ 100KΩ pull-up
Mechanical Specifications:
- Input Method: Finger, Pen or Gloved hand
- Touch Activation Force: 60 - 150g
- Surface Hardness: 3H (Pencil Test)
Reliability:
- Operating Temperature: -10° C ~ 60° C
- Storage Temperature: -20° C ~ 70° C
- Humidity: 60° C, 90% RH 96 HR
- Touch Durability: 35 million touches in a single location
- Surface Scratching: 1 Million times (250gf 60mm/s)
- Surface pitting: 35 Million times (250gf 2 times/s)
- NEMA 4 Capable
Warranty: 1 year

Features

Long life span - exceeds 35 million touches

Variety of films - Anti-glare, Anti-reflective & polish

Superior Accuracy / Drift free operation - 98.0% Linearity

Supports Multiple Operating Systems: MS-DOS, Windows 95/98/2000/XP/CE/ME/2000NT/Vista, OS/2, MAC, Linux, etc.

Scratch Proof - exceeds 3H hardness level

Drawings

17.1-inch Touch Panel Drawing (pdf - 167 KB)

12.1" 5-Wire Resistive Touch Screen [TSR-121-5W ]

Wed, 10 Oct 2007 09:48:21 -0500

High touch resolution

Pressure sensitive, works with any stylus

Not affected by dirt, dust, water, or light

Continued operation even with a cut coversheet (as long as the ITO coating on the glass is not damaged)

Could be operated in the environment with -10° C ~ 60° C

More durable and offer a much greater lifetime and stability than 4-Wire Resistive type

Disadvantages:

80% clarity

Resistive layers can be damaged by a sharp object

Glass is obviously fragile and can be easily broken with a small impact

More expensive than 4-Wire Resistive type

Custom design and sizes between 5.7 to 21.3 inch are available upon request.

Description

5-Wire Resistive Touch Panel for 12" LCD monitors. These Touch Screens are designed for extreme and high-use environments and features superior durability, resolution, accuracy and positioning speed. Resistive touchscreens deliver cost-effective, consistent and durable performance in environments where equipment must stand up to contaminants and liquids, such as in restaurants, factories, and hospitals.

Common Applications:

POS terminals

Financial - ATM & Bill Pay Kiosks

Factory Automation

Industrial Control

Medical Equipment

Retail Kiosks

Specs

Touch Screen: 5-Wire Analog Resistive
Controllers Available: 5-Wire Resistive TP05-5W-USB or TP05-5W-RS232 (sold separately)
Overall Outline Dimensions (WxHxD mm): 271.4 ± 0.2 x 205.8 ± 0.2 x 2.3 ± 0.15
Viewing Area (WxH mm): 249.3 x 188.0
Active Area (WxH mm): 248.3 x 187.0
Glass: ITO Glass, 2.3mm
Front Material/Thickness: Transparent PET (3H) 0.188 mm
Rear Material/Thickness: Glass/2.00t mm
Connector: FPC, 5Pin
Optical Specifications:
- Film type: Polished, Anti-glare or Anti-reflective
- Transparency: Standard 80% ± 3% at 550nm wave length
Electrical Specifications:
- Operation Voltage: DC 5V
- Insulation Impedance: 10MΩ or more @ 25V (DC)
- Linearity: 98.0% (bias less than 2.0%)
- Response Time: 30 msec or less @ 100KΩ pull-up
Mechanical Specifications:
- Input Method: Finger, Pen or Gloved hand
- Touch Activation Force: 60 - 150g
- Surface Hardness: 3H (Pencil Test)
Reliability:
- Operation Environment: -10° C ~ 60° C
- Storage Temperature: -20° C ~ 70° C
- Humidity: 60° C, 90% RH 96 HR
- Touch Durability: 35 million touches in a single location
- Surface Scratching: 1 Million times (250gf 60mm/s)
- Surface pitting: 35 Million times (250gf 2 times/s)
- NEMA 4 Capable
Warranty: 1 year

Features
Long life span - exceeds 35 million touches
Variety of films - Anti-glare, Anti-reflective & polish
Superior Accuracy / Drift free operation - 98.0% Linearity
Supports Multiple Operating Systems: MS-DOS, Windows 95/98/2000/XP/CE/ME/2000NT/Vista, OS/2, MAC, Linux, etc.
Scratch Resistance - exceeds 3H pencil hardness

Drawings

12.1-inch Touch Panel Drawing (pdf - 184 KB)

5-Wire TouchScreen RS232 Controller [SLT-TP05-RS232C-5W ]

Mon, 17 Sep 2007 12:56:40 -0500

Description

Touch Screen RS232 Controller for 5-Wire Analog Resistive Touch Panels. The Touch Screen Controller communicates with PC directly through RS232 serial port. It comes complete with 16-inch (controller to touch panel) extension cable and 5.9 feet (controller to serial port) RS232 cable. The touch panel driver emulates mouse left and right button function, supports handwriting-recognition technology and supports operation systems including Windows 95 / 98 / ME / NT4 / 2000 / XP / XP Tablet PC Edition / Vista, Windows CE2.12 / 3.0 / 4.0 / 5.0 / 6.0 / .NET, DOS, Linux and iMac.

Specifications

Power requirements: +5VDC, typical 70mA

Operating temperature: -20° C to 70° C

Storage Temperature: -30° C to 85° C

Relative Humidity: 95% at 60° C

Protocol: RS232 Model: 9600 bauds, None parity, 8 bits data, 1 stop bit

Resolution: 2048 X 2048

Accuracy Tolerance: Max. +/- 0.5% tolerance

Report rate: Max. 160 points/sec, automatically adjust in 3 rates: 40, 80, 160, ensure data stability

Response time: Max. 24 ms, automatically adjust in 3 rate times: 6ms, 18ms, 24ms

Regulatory Approvals: FCC-B, CE

Pin Out Definition: X, Y, X, Y

Panel resistance: 50 ~ 900 ohm (pin to pin on the same layer)

Dimensions (L x W): 74 mm (2.9 in) x 20 mm (0.78 in)

Warranty: 2 years

Software Features

Calibration: Fast full oriental 4 points position

Compensation: Accuracy 25 points linearity position, Edge compensation

Draw Test: Position and linearity verification

Mouse Emulator: Right / Left button emulation, Normal / Click on touch / Click on release mode, Auto right button

Display Support: Support monitor / display rotation, Support multiple monitor / display, Support QVGA and Half-VGA function, Support split monitor

Handwriting Feature Support: Support handwriting-recognition technology

Supporting Documentation

TouchScreen Controller Dimensions (pdf - 84.0 KB)

5 Wire Flat Cable Drawing (pdf - 88.8 KB)

RS232 Cable Drawing & Pin Assignement (pdf - 120.0 KB)

Resistive Touch Screen Controllers (4 / 5 Wires) FAQ (htm)

TouchKit Drivers & Software:

Windows® 2000/XP/Vista (Not Tablet Edition) (V5.0.0.5017 - 2008/02/14 - 7.85 MB)

Windows® 9X/ME (V3.4.2.5524 - 2007/07/23 - 3.71 MB)

Windows® NT4.0 (V3.4.2.5524 - 2007/07/23 - 3.09 MB)

Windows® CE (.NET, 2.12, 3.0, 6.0 - 8.59 MB)

Windows® XP Embedded (V5.0.0.5017 - 2008/01/31 - 10.3 MB)

DOS (V6.00.07.6509 - 2007/07/23 - 260 KB)

iMac (Mac OS 9.x, Mac OS X, Mac OS X Intel CPU - 1.41 MB)

Linux (14.1 MB)

Linux Previous Driver (5.52 MB)

Touch Screen LCD Module [TM2B8WBL ]

Tue, 30 Nov 1999 00:00:00 -0500

Touch Screen LCD Module includes:

Controller Version: TC553/852
External EEPROM: 512kb
LCD Model: Optrex F-51852GNFQJ-LW-AMN 128x64 2.8"
LCD Mode: White/Black
4-Wire 2.8" Analog Resistive Touch screen
CD-ROM with supporting documentation (one per order).

This kit is assembled and ready to use.

Touch Screen LCD Module [TM2B8GBL ]

Tue, 30 Nov 1999 00:00:00 -0500

Touch Screen LCD Module includes:

Controller Version: TC553/852
External EEPROM: 512kb
LCD Model: Optrex F-51852GNFQJ-LG-ALN 128x64 2.8"
LCD Mode: Green/Black
4-Wire 2.8" Analog Resistive Touch screen
CD-ROM with supporting documentation (one per order).

This kit is assembled and ready to use.

Touch Screen LCD Module [TM2B8BBL ]

Tue, 30 Nov 1999 00:00:00 -0500

Touch Screen LCD Module includes:

Controller Version: TC553/852
External EEPROM: 512kb
LCD Model: Optrex F-51852GNFQJ-LB-AIN 128x64 2.8"
LCD Mode: Blue/Black
4-Wire 2.8" Analog Resistive Touch screen
CD-ROM with supporting documentation (one per order).

This kit is assembled and ready to use.

19.0" 4-Wire Resistive Touch Screen [TSR-190-4W-001 ]

Tue, 30 Nov 1999 00:00:00 -0500

Touchscreens enable first-time users to interface with computers instantly, without any operator training whatsoever

Touchscreens virtually eliminate operator errors because users make selections from clearly defined menus

Touchscreens eliminate keyboards and mice, which many novice users find intimidating and cumbersome to use

Touchscreens are rugged enough to stand up to harsh environments where keyboards and mice can become damaged

Touchscreens provide fast access to all types of digital content

Touchscreens ensure that no space is wasted because the input device is completely integrated into the monitor.

Features:

Proven Resistive Technology

Simplicity of Interface Electronics

Durable Plastic Construction

Less Susceptible to Accidental Touch

Ability to use Finger or Stylus to Activate Touchscreen

High Linear Analog Output

Resistive touchscreens deliver cost-effective, consistent and durable performance in environments where equipment must stand up to contaminants and liquids, such as in restaurants, factories, and hospitals. Disadvantages of resistive touchscreens include only 75% optical transparency and the fact that a sharp object can damage the resistive layers.

Description

4-Wire Resistive Touch Panel for 19" LCD monitors. Touch Innovations Touch Screens are perfect for PDAs, web phones, and other handheld consumer applications. The superior film on glass construction offers the very best light transmission reliability and durability.

Specs

Touch Screen: 4-Wire Analog Resistive
Controllers Available: 4-Wire Resistive SLT-TP05-USB or SLT-TP05-RS232 (sold separately)
Overall Outline Dimensions (WxHxD mm): 396.00 ± 0.3 x 323.00 ± 0.3 x 2.3 ± 0.15
Viewing Area (WxH mm): 377.0 ± 0.3 x 304.0 ± 0.3
Active Area (WxH mm): 375.0 ± 0.3 x 300.0 ± 0.3
Spacer (mm): 0.1
Dot Pitch (WxH mm): 3.0 x 3.0
Glass: ITO Glass, 1.8 mm
PET (ITO Film) Front Surface: Clear Hard-coating, Anti-glare, Anti-Newton ring ITO Film, 188 um
Connector: FPC, 4Pin
Optical Specifications:
- Film type: Anti-glare, Anti-reflective
- EM/RFI Shielding
- Contrast Enhancement Filter (CEF) and/or Circular Polarizer
- Glass, Acrylic or Polycarbonate Backer
- Light Transmission: 85% and more
Electrical Specifications:
- Operation Voltage: 10V DC or less
- Insulation Impedance: 10MΩ or more @ 25V(DC)
- Linearity: 98.5% (bias less than 1.5%)
- Chattering Time: 10 ms
Mechanical Specifications:
- Input Method: finger, pen or gloved hand
- Touch Activation Force: 20 - 80 grams
- Surface Hardness: 3H (Pencil Test) & Hard Coated ITO PET
Reliability:
- Operation Environment: -10° C ~ 60° C
- Storage Temperature: -20° C ~ 70° C
- Humidity: 60° C, 90% RH 120 HR
- Touch Durability: 5 Million touches in a single location
- Surface scratch: 500K (250g, 60mm/s)
- Surface pitting: 10M (250g at 2 times/s)
- NEMA 4 Capable
- Warranty: 1 year

Features

Superior Accuracy / Drift-free operation - 98.5% Linearity

Supported Operating Systems: MS-DOS, Windows 95/98/2000/CE/ME/2000NT, OS/2, MAC, Linux, etc.

Light Transmission: 85% and more

Input Mode: Finger, gloved hand and stylus input

Drawings

19.0-inch Touch Panel Drawing (pdf - 128 KB)

6.5" 4-Wire Resistive Touch Screen [TSR-065-4W ]

Tue, 30 Nov 1999 00:00:00 -0500

Touchscreens enable first-time users to interface with computers instantly, without any operator training whatsoever

Touchscreens virtually eliminate operator errors because users make selections from clearly defined menus

Touchscreens eliminate keyboards and mice, which many novice users find intimidating and cumbersome to use

Touchscreens are rugged enough to stand up to harsh environments where keyboards and mice can become damaged

Touchscreens provide fast access to all types of digital content

Touchscreens ensure that no space is wasted because the input device is completely integrated into the monitor.

Features:

Proven Resistive Technology

Simplicity of Interface Electronics

Durable Plastic Construction

Less Susceptible to Accidental Touch

Ability to use Finger or Stylus to Activate Touchscreen

High Linear Analog Output

Resistive touchscreens deliver cost-effective, consistent and durable performance in environments where equipment must stand up to contaminants and liquids, such as in restaurants, factories, and hospitals. Disadvantages of resistive touchscreens include only 75% optical transparency and the fact that a sharp object can damage the resistive layers.

Description

4-Wire Resistive Touch Panel for 6.5" LCD monitors. Touch Innovations Touch Screens are perfect for PDAs, web phones, and other handheld consumer applications. The superior film on glass construction offers the very best light transmission reliability and durability.

Specs

Touch Screen: 4-Wire Analog Resistive
Controllers Available: 4-Wire Resistive SLT-TP05-USB or SLT-TP05-RS232 (sold separately)
Overall Outline Dimensions (WxHxD mm): 155.0 ± 0.2 x 89.20 ± 0.2 x 1.4 ± 0.1
Viewing Area (WxH mm): 143.60 x 79.50
Active Area (WxH mm): 141.00 x 77.00
Spacer (mm): 0.1
Dot Pitch (WxH mm): 3.0 x 3.0
Glass: ITO Glass, 1.1 ± 0.1 mm
PET (ITO Film) Front Surface: Clear Hard-coating, Anti-glare, Anti-Newton ring ITO Film, 188 um
Connector: FPC, 4Pin
Optical Specifications:
- Film type: Anti-glare, Anti-reflective
- EM/RFI Shielding
- Contrast Enhancement Filter (CEF) and/or Circular Polarizer
- Glass, Acrylic or Polycarbonate Backer
- Light Transmission: 83 ± 5% at 550nm wave length
Electrical Specifications:
- Operation Voltage: 5V DC, 1mA
- Insulation Impedance: 10MΩ or more @ 25V(DC)
- Linearity: 98.5% (bias less than 1.5%)
- Chattering Time: 30 msec or less
Mechanical Specifications:
- Input Method: finger, pen or gloved hand
- Touch Activation Force: 60 - 150 grams
- Surface Hardness: 3H (Pencil Test) & Hard Coated ITO PET
Reliability:
- Operation Environment: -10° C ~ 60° C
- Storage Temperature: -20° C ~ 70° C
- Humidity: 60° C, 90% RH 120 HR
- Touch Durability: 5 Million touches in a single location
- Surface scratch: 500K (250g, 60mm/s)
- Surface pitting: 10M (250g at 2 times/s)
- NEMA 4 Capable
- Warranty: 1 year

Features

Superior Accuracy / Drift-free operation - 98.5% Linearity

Supported Operating Systems: MS-DOS, Windows 95/98/2000/CE/ME/2000NT, OS/2, MAC, Linux, etc.

Light Transmission: 83 ± 5% at 550nm wave length

Input Mode: Finger, gloved hand and stylus input

Drawings

6.5-inch Touch Panel Drawing (pdf - 170 KB)

Touch Screen LCD Module [TM2B8BWL ]

Tue, 06 Feb 2007 13:22:25 -0500

Touch Screen LCD Module includes:

Controller Version: TC553/852
External EEPROM: 512kb
LCD Model: Optrex F-51852GNBJ-LW-AKN 128x64 2.8"
LCD Mode: Blue/White
4-Wire 2.8" Analog Resistive Touch screen
CD-ROM with supporting documentation (one per order).

This kit is assembled and ready to use.

Touch Screen LCD Module [TM2B8BWSL ]

Tue, 06 Feb 2007 13:22:25 -0500

Touch Screen LCD Module includes:

Controller Version: TC553/852
External EEPROM: 512kb
LCD Model: Optrex F-51852GNFJ-SLW-AJN 128x64 2.8"
LCD Mode: Blue/White
4-Wire 2.8" Analog Resistive Touch screen
CD-ROM with supporting documentation (one per order).

This kit is assembled and ready to use.

Touch Screen LCD Module [TM3C4WBS ]

Fri, 02 Jun 2006 20:55:30 -0500

Touch Screen LCD Module comes complete with:

Controller Version: TC51854
Flash: 4M bit
LCD Model: Optrex F-51854GNFJ-SLW-ABN 160x128 4.7"
LCD Mode: Black/White
Touch Screen: TSR-047-4W
CD-ROM with supporting documentation (one per order).

Touch Screen LCD Module [TM2B8BWS ]

Fri, 02 Feb 2007 20:53:37 -0500

Touch Screen LCD Module includes:

Controller Version: TC553/852
External EEPROM: 512kb
LCD Model: Optrex F-51852GNFJ-SLW-AEN 128x64 2.8"
LCD Mode: Blue/White
4-Wire 2.8" Analog Resistive Touch screen
CD-ROM with supporting documentation (one per order).

This kit is assembled and ready to use.

120VAC 9VDC 500mA AC Adaptor [AD-0950 ]

Thu, 26 Oct 2006 15:51:03 -0500

TRANSFORMER WALL 9VDC 500MA P-5

INPUT: 120V AC 60Hz
OUTPUT: 9V DC 500mA
Transformer Type: US/Canada
Polarization: Positive Center
Cord Plug: 2.1mm I.D. x 5.5mm O.D. x 12mm Female (P-5)
Cord Length: 6ft
Color: Black
Standard: UL, cUL
Lead Free
RoHS Compliant
Drawings: